C9 M designed to significantly reduce the lifting time of wires and low height above ground
Main advantages
- Designed not to create damage during contact with mechanical machinery (harvesting machine-pruner-soil cultivation)
- Cross section 42 x 32 mm – 1.26 ” (1.66 x 1.26 ” – 1.02 “)
- Optimal compromise between flexibility and high mechanical strength
- Strong ability to install in difficult ground – Crimped edge on the bottom of the stake
- Special shape of the hooks to avoid closure during mechanical works
- 32 mm (1.26 “) flat side section for good stability
- Double hook for the wires during the soil cultivation
Galvanization
Type of hooks
- Type A
Hooks designed to significantly reduce the arduousness of the work and its cost
Adapted to current and future mechanical works (such a mechanical lifting)
- Type H
Double hook for the wires during the soil cultivation
Installation Advice
- Cap and mini piston on request
- Plant the post during the wet season
- Drive 25-30 % of the post length into the ground
- Deep rip soils during site preparation
- Drill a pilot hole in difficult ground
- Adaptation of the inter-distance between the posts in particular (windy area-high production in hectoliter-high degree of mechanization)
No comments.