C1 Maxi designed for vineyards with very high loads and a high height above ground
Main advantages
- Profiling without any angle in order not to damage during mechanical contacts
- Special cross section to protect the open side of the post (60 x 40 mm – 2.36’’ x 1.57’’)
- Optimal compromise between flexibility and high mechanical strength
- Strong ability to install in difficult soil
- Side 40 mm to optimize the stability of the trellising
- Special shape of the hooks to avoid closure during the mechanical harvest
- Wire in contact with the internal structure of the post
- Double hook for the wires during the soil cultivation
Galvanization
Type of hooks (option A or N on demand)
- A Type
- To easily remove and replace the moving wires
- N Type
- Wires in a fixed position
- H Type
Installation advice
- Cap and mini piston on request
- Plant the post during the wet season
- Drive 25-30 % of the post length into the ground
- Deep rip soils during site preparation
- Drill a pilot hole in difficult ground
- Adaptation of the inter-distance between the posts in particular (windy area-high production in
- hectoliter-high degree of mechanization)
No comments.